Big Capacity Wet Granulation Machine GMP Standard For Pharmacy Industry
Description of pharmaceutical ocsillating granulator
The ocsillating type granulator makes the wet powder or the block dry material into the required granules, and the screen is easy to assemble and disassemble, and the elastic is adjustable. The main components of the machine are enclosed in the machine body, and a lubrication system is attached to make the production process run smoothly. The whole machine is made of stainless steel. In line with GMP standards, the quality and economic efficiency of the pellets are significantly improved.
1. This machine is a kind of swaying action of rotating drum. The wet powder raw material can be made into granules through the screen, and it can also be widely used to pulverize and become a ready-made granule.
2. In the case of chemicals, the powder is used as a wet-laid powder, and after drying, it is used to compress the tablet, and it is also possible to pulverize the block which is agglomerated during storage or agglomerated during chemical processing. It is used industrially to treat confectionery and sugar blends and malt milk, and other industries such as ceramics, plastics and the like into shaped pellets.
3. Not suitable for semi-solid, fluid, slurry or wear.
Ocsillating granulator Construction instructions:
1. The rectangular parallelepiped, the bearing frame, the reduction gear box and the machine base are composed of three major parts. The feeding powder bucket is connected with the bearing frame and extends out of the machine. The front end of the machine base is designed to extend and land widely and smoothly, so it does not need to be installed and can be placed indoors.
2. Granule manufacturing device: The reel horizontal device is under the hopper, and there are bearing supports at the front and rear. It is driven by the rack to make the reverse rotation. The front bearing seat of the end face is movable, when assembling and disassembling | Three screws are provided, and the front bearing housing and the rotating drum can be sequentially extracted. The two ends of the rotating drum adopt symmetrical convex couplings, which are not restricted by the reverse and easy to assemble and disassemble.
3, screen clamp: the device is on both sides of the rotating cylinder, made of steel pipe, there is a long groove in the middle, the two ends of the screen are embedded in the groove, turn the hand wheel to wrap the screen on the outer circle of the rotating drum, hand The inner wheel of the wheel has a ratchet to support, and the elastic can be adjusted.
4. Reducer: It adopts pot wheel drive, the speed ratio is 1:30, the oil can be stored in the box to ensure good lubrication and no noise of the rack, gear and worm wheel. The outer end of the worm wheel is equipped with an eccentric rod to drive the rod to reciprocate. , and the meshed gear shaft is used as a reverse rotation motion.
5. Base motor: The motor mounting plate is connected with the machine hinge, and the other end is connected with the nut. When the hand wheel is turned on the base, the screw is rotated, the nut drives the motor board, and the adjustable triangle belt is tight.
|capacity||50-200 kg/h||50-400 kg/h|