Industrial Vibro Fluid Bed Dryer High Thermal Efficient Long Service Life
Fluidization technology originated in 1921. A fluidized bed dryer is also called a fluidized bed dryer, and fluidized drying refers to a process in which a drying medium dries solid particles in a fluidized state.
Horizontal vibro Fluid bed dryer is available in all industries, from heavy mining to food, fine chemicals and pharmaceuticals, to the sugar industry. It is a stationary unit with FD and ID pans, ranging from 15T / hr to 50T / hr Capacity and dust removal system. They provide an efficient method of drying relatively free flowing particles having a relatively narrow particle size distribution. Typically, fluid bed dryers operate in a flow mode through the bed, with hot air passing through the product perpendicular to the direction of travel. The dried product is discharged from the same part
FAQ before inquiry : we should consider the following things of the raw material that you are going to dry:
1- material name
2. material shape and size
3. initial moisture
4. final required moisture
5. drying temperature and heating source
6. site space and conditions
Fluidized bed dryer
The material enters the machine at the feeding port. Under the action of the vibration force, the material is thrown forward in the direction of the fluidized bed, and the hot air passes through the fluidized bed and the wet material to exchange heat. After cooling by the cold air, the humid air passes through. After the cyclone separator is dusted, it is discharged by the air outlet, and the dry material is discharged from the discharge port.
Industrial Virbo fluid bed dryer Characteristics:
Vibration source is the use of vibration motor drive, smooth operation, easy maintenance, low noise, long life, easy maintenance. High thermal efficiency, than the general drying device can save more than 30%.
Bed temperature distribution uniformity, no local overheating phenomenon, fluidization symmetry, no dead angle phenomenon.
Good adjustability, adaptable to wide. The thickness of the material layer and the moving speed in the machine and the full amplitude change evenly can achieve stepless adjustment.
The material surface damage is small, can be used for the drying of fragile materials, and the irregular material particles do not affect the work effect.
The fully enclosed structure is used to effectively prevent the cleaning of the air-fork infection between the material and atmosphere. When used for high-moisture material mass production, multi-series can be used to meet user requirements (typical materials: such as polyacrylamide, etc.)
|Model||Area of fluidized-bed
|Temperature of inlet air
|Temperature of outlet
|Capacity to vapor
* The above is the largest evaporation.