Lightweight Interlocking Brick Making Machine , Concrete Block Making Machine
Steam curing free! lightweight interlocking brick making machine
The cement foaming machine integrates hydraulic system, dosing system, mixing system, automatic foaming system, digital control technology, etc. The lightweight foamed cement produced by this equipment is fine and uniform, and the density can be continuously adjusted according to needs. It is a cement foaming equipment with stable performance, low foaming agent consumption and simple operation.
This cement foaming machine can be applied in the following scope:
- The construction of the heat insulation layer in the floor heating project. It is the first choice equipment for the floor heating construction. And the strength of the insulation layer can be arbitrarily adjusted according to the user's requirements.
- Roof insulation, especially for the insulation of high-rise buildings. That is suitable for the hot areas and cold areas as it can keep the room cool in summer and warm in winter for its insulation merit.
- waterproof layer on the roof. After adding appropriate amount of additives, it has strong waterproof effect and solve the problem of roof leakage.
- Insulation of freezer, cold wind library, tap water pipes, pools, heating pipes and other pipes.
- Used for construction of insulation wall, sound insulation wall, lightweight insulation block making, etc.
Lightweight interlocking insulation block/bricks making process
- Feeding raw material to the mixer
2. mixing raw material in mixer
3. Foaming agent foaming and add to the mixer
4. The cement slurry and the foam mixture in the mixer are evenly discharged to the trolley or the motor tricycle through the discharge port, and then transported to the mold, or can be transported to the mold through the pump.
5. Water curing for 14 to 28 days to get finial blocks or other products.
Cement, Fly Ash, Foam & Water
|Hydraulic system pressure
|Dimensions(L x W x H)