Beijing Silk Road Enterprise Management Services Co.,LTD annieytdryer@163.com
Stainless Steel Revolving Granulator For Extruding Cylinder Pellet GMP Sandard

Stainless Steel Revolving Granulator For Extruding Cylinder Pellet GMP Sandard

  • High Light

    granulation equipments

    ,

    extruder granulator

  • Material
    SUS304 SUS316L Food Grade GMP
  • Standard
    GMP
  • Product
    Cylinder Granules
  • Cutter
    Speed Viable
  • Color
    Stainless Steel
  • Voltage
    380V 220V
  • Granule/pellet Size
    1-3mm Cylinder Granules
  • Place of Origin
    China
  • Certification
    SGS CE ISO
  • Model Number
    ZL
  • Minimum Order Quantity
    1units
  • Price
    USD2900-3890 per unit
  • Packaging Details
    plywood or shipping container
  • Delivery Time
    25 working days
  • Payment Terms
    Western Union, MoneyGram, D/A, L/C, D/P, T/T
  • Supply Ability
    1000units per year

Stainless Steel Revolving Granulator For Extruding Cylinder Pellet GMP Sandard

Stainless Steel Revolving Granulator For Extruding Cylinder Pellet GMP Sandard

 

Working principle 

The two ends are aligned with the linear velocity of the inner and outer rings of the die plate, and the misalignment friction between the wheel and the die does not occur, the resistance is reduced, the kinetic energy loss is reduced, and the service life of the die is prolonged, which is a major difference from the similar compression molding equipment. . The utility model adopts a screw center pressure regulating mechanism, and the mold gap is large and small, and different materials are applied to ensure the pressing effect. The pressure roller adopts a large groove width, is pressure-resistant and wear-resistant, and the pressure roller adopts multiple uniform distributions, and the operation is stable, and the pressing area is increased, thereby improving production efficiency. Sawdust and straw compression molding require a lot of pressure. In the same kind of granulation, briquetting and rod making equipment, the pressure roller component is the central component of the whole equipment. The advantage of the “cone flat die” can be increased by any other equipment. For example, the ring model granulator can not be enlarged due to the diameter of the ring die, which causes the bearing of the pressure wheel to change. Small, assembled bearings do not have a strong ability to withstand pressure, bearing damage caused by the three stops of the equipment. This type of machine has a variety of compression molding. Round bars, squares and pellets can be made by changing the mold. It can adapt to different materials for compression molding and achieve the best benefits. The granulating room is equipped with an observation door, which is easy to check and maintain at any time.

 

 

 

​​Scope of Application
1. The granulator is a rocking action of a rotating drum. The wet powder material can be ground into particles by a wire sieve, and can also be widely used for pulverizing and becoming a ready-made granule. 2. In the case of chemicals, the powder is used as a wet-laid powder, and after drying, it is used to compress the tablet, and it is also possible to pulverize the block which is agglomerated during storage or agglomerated during chemical processing. It is used industrially to treat confectionery and sugar blends and malt milk, and other industries such as ceramics, plastics and the like into shaped pellets. 3. It is not suitable for semi-solid, fluid, slurry or wear.

Revolving granulator Characteristics
All parts contacted with raw material in this machine are made of stainless steel.Its apperance is beauty and taste and its structure is reasonable.Its efficiency is high and the granule is beauty.Its discharge is automatic.Therefore it can avoid damaged conditions caused manual.It is suitable for in line production too

Technical Parameter


Size of milling knife(mm)
JLZ-80 JLZ-300 JZL-350
Diameter of granule(mm) Φ0.8-3.0
(it may be in accordance with the requirements of costomers)
Φ.8-3.0
(it may be in accordance with the requirements of costomers)
Φ.8-3.0
(it may be in accordance with the requirements of costomers)
Overall dimesions(mm) 450×300×450 880×640×1200 1300×800×1400
Power of motor
(kw)
0.18 5.5 11
Weight(kg) 25 400 780

Production capcity(kg/h)

1-10
100-300 250-600


Note:Becaise the rae materials exist in difference,the output in the table is for reference only.]