Superfine grinder structure principle
The ultra-fine pulverizer consists of a machine base, a rotating drum, a crushing cutter, a fine powder trap, and a transmission system. The machine is a vertical drum structure, and the konjac powder raw material adopts the method of feeding the auger. When the material enters the pulverizing chamber, the vortex is boiled under the action of the negative pressure fan, and the drum is driven by the main power, and the cutter is pulverized. The high-speed rotation intersects with the boiling konjac powder to make high-speed cutting. After the cutting, the konjac powder reaches the standard konjac powder under the action of the fine powder trap and enters the cyclone separator to separate and discharge. The konjac powder that does not meet the standard continues to be cut at high speed until it reaches the need. After the fineness, the cyclone separator is separated and discharged.
Superfine grinder design principle
Superfine grinder and separation are the main functions of the crusher and also a key factor affecting the crushing efficiency and energy consumption. According to the research on the pulverization principle at home and abroad, the outer dimensions of the hammer head, the gap between the hammer head and the ring gear teeth, and the classification effect are all significant effects on the pulverization efficiency and energy consumption.
|inlet material diamenter||mm||＜10||＜10||＜15|
|oulet material diamenter||mesh||80-320||80-450||80-450|
|main rotaing speed||r/min||3800-6000||3800-6000||3800-4000|