Manual 5-12mm Single Punch Tablet Compression Machine For Lab Experiment

Product Description

Manual Type Single Punch Tablet Compression Machine For Lab Experiment

This machine is a hand-operated single punching tablet press machine with no motor drive and no power supply. Used to press various granular raw materials into discs, suitable for experiments
Room trial production, teaching, small-scale production of various tablets, sugar tablets, calcium tablets, etc., is a small desktop continuous tableting machine, excellent performance, suitable
Strong, easy to use, easy to repair, small size, light weight, this machine only installs a die, the filling depth of the material, the thickness of the tablet can be
Adjustment, can adapt to the requirements of the pharmaceutical industry to suppress various Chinese and Western medicine tablets and the requirements of other industries to suppress various similar products, and are well received by various industries.
The majority of users are welcome.

Hand press machine structure features
The main body of the machine is a gantry type body, which is welded with carbon steel, and the main shaft is connected with the eccentric wheel and the filling.
Cam, the right end of the shaft is equipped with a rocker arm and a handle, and the spindle is manually driven to drive the eccentric wheel, the filling cam, and the lifting
Rod and feeder, small lever to drive the feeder, do different lifting movements.

Technical Parameters
Model YP-1 Hand-cranked single punching tablet press machine
Maximum tablet pressure 15KN
Tablet diameter range 5-12mm
Maximum filling depth 16mm
Maximum tablet thickness 2-6mm
Production capacity 30-50 capsules / min (depending on the hand speed)
Dimensions 300*260*520mm
Machine weight 20kg

The main working process is divided into: A, filling, B, stamping, C, film. Three procedures are carried out continuously, each of which can be adjusted to suit various tablets.
Forming. The machine has the advantages of small size, light weight, beautiful appearance, compact structure, simple operation, wide application, no need to use electricity for easy carrying, and the like.
Simply, you can get the tablets you need by replacing them with different sizes of molds.

Hand press machine instructions
The method of loading the die: first remove the hopper, the feeder and the middle die plate, and wipe the medium die plate, the die hole and the installed abrasive tool, and follow the steps below:
First insert the lower die into the hole of the lower punch core. The notch of the die must be aligned with the lock screw hole and inserted into the bottom of the hole to tighten the locking screw.
Insert the upper die into the hole of the upper punch and insert it into the hole. Tighten the taper nut with a wrench.
Place the middle mold into the hole of the middle mold. Note that the end face of the middle mold must be on the plane with the middle mold platen. Do not raise it, then tighten the screw.
Press the middle die plate on the upper body, first insert the lower die into the middle die hole, and then manually insert the upper die into the middle die to make the three points into a line, and fix the middle die table on this basis.
The fixing screws under the plate are manually rotated for one week to confirm that the upper, middle and lower molds can be perfectly matched, and the materials are put into pressure test.
Adjust the height of the film. When adjusting, adjust the blade adjustment nut so that it is level with the platen platen at the highest point.
The thickness of the tablet is adjusted to fill the adjusting nut, and the counterclockwise direction is adjusted to increase the filling amount, that is, to increase the thickness of the tablet, and conversely to reduce the thickness of the tablet.
After adjusting the height of the tablet and the thickness of the tablet, the adjustment nut plate is fixed.

Care instructions
Lubrication of the parts, oily parts on the moving parts, pay attention to refueling (oil and butter) before use.
When used once or stopped, the remaining materials should be cleaned and coated with anti-rust oil.
Apply the anti-rust oil to the stamped container and do not touch or rust.

Precautions
Do not put your hands under the upper and middle molds to avoid personal injury.
The material must first be granulated according to the process before tableting.
When the device is in use, the device should be supported on a fixed workbench.