70-150kg/Batch Static Fluid Bed Dryer , 500 Liters Industrial Drying Equipment

Additive Seasoning Vertical Fluidized Bed Dryer Low Maintenance Energy Saving

Main feature of vertical fluid bed dryer
The material container is air bag type inflatable seal, which is convenient, fast and reliable.
The stirring device is designed in the container, the material is in an excellent fluidized state, the device has no dead angle, and the drying is uniform and rapid;
It is convenient and quick to use tilting discharge;
The drying speed is fast, and the drying time of each batch takes about 20-30 minutes;
The butterfly head is used, the wind resistance is small, and there is no dead angle. Closed operation, no pollution, in line with GMP requirements.

Model Description
Example: GFG-500 refers to a high-efficiency fluidized bed dryer with a hopper capacity of 500 liters. The production capacity is 70-150kg/batch.

Application

For Food powder or granule drying, chemical powder drying, medicine powder drying.

Used for boiling drying of particle material with a size of 0. 1-6mm, and suitable for speedy drying of finished product, intermediate (semi finished product) in such trades aspharmaceutical, food, light industry and chemical etc.

Working principle
Used the draught of fan, natural air flows through purifying cabinet, heater and froms high speed air flow in the hole of material bed, which makes the material into boiling(fluidized)status, during the large area touch between gas and solid phases, mosture of material is veaporated quickly, and thus reaching the purpose of drying.

Main feature
Hopper is sealed with frame by way of O type air cell, featuring convenient handling. Hopper is equipped with agitator inside, materail is dried uniformly and speedily without boiling dead angle.
Filter bag and cylinder automatic bag shake unit are supplied on the top to avoid materialloss.
With air purifying cabinet, it usesoutdoor air has no influence on air purifying load of purified workshop.
High drying speed, drying time can be freely set up according to features of materials, normally at 10-30min.